cmd.document.OCRPages not launching anything
Moderators: TrackerSupp-Daniel, Tracker Support, Paul - Tracker Supp, Vasyl-Tracker Dev Team, Chris - Tracker Supp, Sean - Tracker, Ivan - Tracker Software, Tracker Supp-Stefan
Forum rules
DO NOT post your license/serial key, or your activation code - these forums, and all posts within, are public and we will be forced to immediately deactivate your license.
When experiencing some errors, use the IAUX_Inst::FormatHRESULT method to see their description and include it in your post along with the error code.
DO NOT post your license/serial key, or your activation code - these forums, and all posts within, are public and we will be forced to immediately deactivate your license.
When experiencing some errors, use the IAUX_Inst::FormatHRESULT method to see their description and include it in your post along with the error code.
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
cmd.document.OCRPages not launching anything
Hello gents,
I'm trying to figure out how to access OCR pages within the Editor SDK. It doesn't seem to launch anything when I use the Execute button in the Command tab of your demo. Is there any reason for this? Is it currently implemented within the SDK
Thanks,
Doc.It Development
I'm trying to figure out how to access OCR pages within the Editor SDK. It doesn't seem to launch anything when I use the Execute button in the Command tab of your demo. Is there any reason for this? Is it currently implemented within the SDK
Thanks,
Doc.It Development
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: cmd.document.OCRPages not launching anything
Hello docu-track99,
The problem is that you did not include the OCR plugin in your code.
Here's the code that needs to be evaluated for the correct work of the OCR (also read the comments provided):
Cheers,
Alex
The problem is that you did not include the OCR plugin in your code.
Here's the code that needs to be evaluated for the correct work of the OCR (also read the comments provided):
Code: Select all
//Note that plugins must be loaded before the initialization of the control after you've initialized Instance
Inst.StartLoadingPlugins();
//Also, the project should contain the PluginsData folder and within it there should be the OCRLanguages folder with dictionaries for the correct command work
Inst.AddPluginFromFile("..\\Plugins\\OCRPlugin.pvp");
Inst.FinishLoadingPlugins();
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
Great, thanks for the help.
So I've got the OCR plugin loading correctly now, however I don't have the languages installed. I'm unclear on where the PluginsData folder should go. I've tried including it in several ways but I still get "Languages: No any installed" in the OCR dialog.
Thanks!
So I've got the OCR plugin loading correctly now, however I don't have the languages installed. I'm unclear on where the PluginsData folder should go. I've tried including it in several ways but I still get "Languages: No any installed" in the OCR dialog.
Thanks!
-
- Site Admin
- Posts: 6815
- Joined: Mon Oct 15, 2012 9:21 pm
- Location: London, UK
Re: cmd.document.OCRPages not launching anything
Hi docu-track99,
I'm not a developer, so I'll leave that particular question for Sasha, or another of the Dev. Team.
I'm posting because I'm interested in the dialogue that says "Languages: No any installed" - can you please upload a screen-shot so that I can have the Dev. Team fix the grammar?
Thanks,
I'm not a developer, so I'll leave that particular question for Sasha, or another of the Dev. Team.
I'm posting because I'm interested in the dialogue that says "Languages: No any installed" - can you please upload a screen-shot so that I can have the Dev. Team fix the grammar?
Thanks,
If posting files to this forum, you must archive the files to a ZIP, RAR or 7z file or they will not be uploaded.
Thank you.
Best regards
Will Travaglini
Tracker Support (Europe)
Tracker Software Products Ltd.
http://www.tracker-software.com
Thank you.
Best regards
Will Travaglini
Tracker Support (Europe)
Tracker Software Products Ltd.
http://www.tracker-software.com
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
Sure thing! What's your preferred method for uploading screenshots? It seems that uploading attachments refuses .png, .bmp, .jpeg and .tif.
-
- Site Admin
- Posts: 6815
- Joined: Mon Oct 15, 2012 9:21 pm
- Location: London, UK
Re: cmd.document.OCRPages not launching anything
Hi docu-track99,
Any is fine, but it will need to be uploaded in a .zip folder or RAR/7Zip archive, otherwise the forums will reject the upload.
Cheers,
Any is fine, but it will need to be uploaded in a .zip folder or RAR/7Zip archive, otherwise the forums will reject the upload.
Cheers,
If posting files to this forum, you must archive the files to a ZIP, RAR or 7z file or they will not be uploaded.
Thank you.
Best regards
Will Travaglini
Tracker Support (Europe)
Tracker Software Products Ltd.
http://www.tracker-software.com
Thank you.
Best regards
Will Travaglini
Tracker Support (Europe)
Tracker Software Products Ltd.
http://www.tracker-software.com
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: cmd.document.OCRPages not launching anything
Hi docu-track99,
The plugins data folder should go in the same folder where the PDFXEditCore.dll lies.
It's the same PluginsData folder that is included when the Editor is installed.
HTH
The plugins data folder should go in the same folder where the PDFXEditCore.dll lies.
It's the same PluginsData folder that is included when the Editor is installed.
HTH
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
Here you go!
You do not have the required permissions to view the files attached to this post.
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
I can see have the PluginsData folder in the correct location in the PDF Editor. I'm also able to load the OCR form thanks to the code from above. But it still won't load any languages when I load the OCR form from the demo solution.
I'm attaching the original Tracker v5 Demo solution, but I have a modified version of it which enables OCR. How can I get the languages to load in this demo solution?
Is there any other code I need to run to set the languages? If I want access to the languages in the Tracker v5 Demo solution, should it be sufficient to simply have the PluginsData folder present in C:\Program Files\Tracker Software\PDF Editor ?
Not sure what else I can try to get the languages to show up.
Thanks,
Doc.It Development
I'm attaching the original Tracker v5 Demo solution, but I have a modified version of it which enables OCR. How can I get the languages to load in this demo solution?
Is there any other code I need to run to set the languages? If I want access to the languages in the Tracker v5 Demo solution, should it be sufficient to simply have the PluginsData folder present in C:\Program Files\Tracker Software\PDF Editor ?
Not sure what else I can try to get the languages to show up.
Thanks,
Doc.It Development
You do not have the required permissions to view the files attached to this post.
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: cmd.document.OCRPages not launching anything
Hello docu-track99,
As I said before - the PluginsData folder must be where the registered PDFXEditCore.dll lies. Then it will work.
If it's the dll from the C:\Program Files\Tracker Software\PDF Editor then yes - the PluginsData will be read there.
If you used regsvr32 to register the PDFXEditCore.dll from custom folder (for example inside your project) then the PluginsData folder must be near it.
Don't forget that the PluginsData folder must contain the OCRLanguages folder with at least one valid language file.
Cheers,
Alex
As I said before - the PluginsData folder must be where the registered PDFXEditCore.dll lies. Then it will work.
If it's the dll from the C:\Program Files\Tracker Software\PDF Editor then yes - the PluginsData will be read there.
If you used regsvr32 to register the PDFXEditCore.dll from custom folder (for example inside your project) then the PluginsData folder must be near it.
Don't forget that the PluginsData folder must contain the OCRLanguages folder with at least one valid language file.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
Thanks Alex,
What I wasn't doing properly was I didn't register the .dll. I had to register it with regsvr32 using the command prompt as admin. I believe I also added the reference to the .dll in my project, but for some reason I can't see the reference in my project, so I'm not sure if this was necessary or not. In any case, it's working now.
Thanks for all your help.
Regards,
Doc.It Development
What I wasn't doing properly was I didn't register the .dll. I had to register it with regsvr32 using the command prompt as admin. I believe I also added the reference to the .dll in my project, but for some reason I can't see the reference in my project, so I'm not sure if this was necessary or not. In any case, it's working now.
Thanks for all your help.
Regards,
Doc.It Development
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: cmd.document.OCRPages not launching anything
Glad that worked for you
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
Hello folks,
I just noticed that if you cancel an OCR operation it appears to crash the control (cancel while it is OCRing pages).
Regards,
Doc.It Development
I just noticed that if you cancel an OCR operation it appears to crash the control (cancel while it is OCRing pages).
Regards,
Doc.It Development
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: cmd.document.OCRPages not launching anything
Hello docu-track99,
Please confirm on what are you using - the OCR command or the OCR operation. Also, please paste a code sample with the problem so we can test on our side.
Cheers,
Alex
Please confirm on what are you using - the OCR command or the OCR operation. Also, please paste a code sample with the problem so we can test on our side.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
Hi Alex,
Probably you can reproduce it on your side without a code sample. I'm just using your OCR Pages menu option. While the document is being OCR'ed (when the progress bar is shown), simply click cancel during the operation.
Regards,
Doc.It Development
Probably you can reproduce it on your side without a code sample. I'm just using your OCR Pages menu option. While the document is being OCR'ed (when the progress bar is shown), simply click cancel during the operation.
Regards,
Doc.It Development
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: cmd.document.OCRPages not launching anything
Hello docu-track99,
This is a bug and it will be fixed in one of the future releases.
Cheers,
Alex
This is a bug and it will be fixed in one of the future releases.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 138
- Joined: Wed Mar 09, 2016 12:47 am
Re: cmd.document.OCRPages not launching anything
This issue has a strange behavior for me. Cancelling an OCR command will not always crash the Editor.
When it does, it does so after a certain delay (~ 5 secs?). After cancelling the OCR, I'm able to perform other commands on the same document then, all of a sudden, the Editor's process gets killed.
When it does, it does so after a certain delay (~ 5 secs?). After cancelling the OCR, I'm able to perform other commands on the same document then, all of a sudden, the Editor's process gets killed.
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: cmd.document.OCRPages not launching anything
Hello claude vidal,
The thing is that the Cancel is not yet being implemented inside the operation itself thus the results are not valid and these problems occur. We know about this and will try to fix this in the nearest future.
Cheers,
Alex
The thing is that the Cancel is not yet being implemented inside the operation itself thus the results are not valid and these problems occur. We know about this and will try to fix this in the nearest future.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
Hi folks,
When I launch the OCR Pages command the control is crashing. I believe that perhaps since I updated to build 317 this broke the OCR. The OCR plugin I'm using is still from 316. Has this been updated? Where can I download the OCR plugin if there is a new version?
Thanks,
Doc.It Development
When I launch the OCR Pages command the control is crashing. I believe that perhaps since I updated to build 317 this broke the OCR. The OCR plugin I'm using is still from 316. Has this been updated? Where can I download the OCR plugin if there is a new version?
Thanks,
Doc.It Development
-
- User
- Posts: 518
- Joined: Thu Dec 06, 2007 8:13 pm
Re: cmd.document.OCRPages not launching anything
Please disregard, I had to download the standard free version of the PDF X Editor to get my hands on the new plugins as they don't come packaged with the SDK (as I hoped they would).
Thanks,
Doc.It Development
Thanks,
Doc.It Development
-
- Site Admin
- Posts: 6815
- Joined: Mon Oct 15, 2012 9:21 pm
- Location: London, UK
Re: cmd.document.OCRPages not launching anything
If posting files to this forum, you must archive the files to a ZIP, RAR or 7z file or they will not be uploaded.
Thank you.
Best regards
Will Travaglini
Tracker Support (Europe)
Tracker Software Products Ltd.
http://www.tracker-software.com
Thank you.
Best regards
Will Travaglini
Tracker Support (Europe)
Tracker Software Products Ltd.
http://www.tracker-software.com
-
- User
- Posts: 914
- Joined: Wed Sep 30, 2009 6:53 pm
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: cmd.document.OCRPages not launching anything
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ