PDF XChange Forum

Code: Select all

ULONG_T GetPermFlags(IPXC_Document* pRDoc)
{
    ULONG_T nRes = (ULONG_T)-1;
    CComPtr<IPXC_SecurityHandler> pHandler;
    pRDoc->GetSecurityHandler(VARIANT_TRUE, &pHandler);
    if (pHandler)
        pHandler->GetSecurityInfo(pRDoc, &nRes);
    return nRes;
}

Code: Select all

enum PXC_PermsFlags
{
	PermF_Open					= 0x01,					// The user can open and decrypt the document.
	PermF_Secure				= 0x02,					// The user can change the document's security settings

	PermF_Print					= Permit_Printing,		// 0x04
														// The user can print the document. Page Setup access is unaffected
														// by this permission, since that affects Acrobat's preferences - not
														// the document's. In the Document Security dialog, this corresponds
														// to the Printing entry.

	PermF_Edit					= Permit_Modification,	// 0x08
														// The user can edit the document more than adding or modifying
														// text notes (see also pdPermEditNotes). In the Document Security
														// dialog, this corresponds to the Changing the Document entry.

	PermF_Copy					= Permit_Copying_And_TextGraphicsExtractions,	// 0x10,
														// The user can copy information from the document to the clipboard.
														// In the document restrictions, this corresponds to the
														// Content Copying or Extraction entry.

	PermF_EditNotes				= Permit_Add_And_Modify_Annotations,	// 0x20,
														// The user can add, modify, and delete text notes (see also pdPermEdit).
														// In the document restrictions, this corresponds to the Authoring Comments and Form Fields entry.

	PermF_SaveAs				= 0x40,					// The user can perform a Save As.... If both pdPermEdit and pdPermEditNotes are disallowed,
														// Save will be disabled but Save As... will be enabled. The Save As... menu item is not
														// necessarily disabled even if the user is not permitted to perform a Save As....
														// note: This cannot be set by clients.

	PermF_Ext					= 0x80,

	// Added perm bits (PV2) used for standard security handler
	// These bits only applies to standard security handler and they are
	// used only when kenLength > 5 (40bits)
	// Note: When keyLength > 5 is specified, standard security handler willl
	// Encrypt Dict with Revision 3.  Rev 3 is support by Acrobat 5.0 and up.

	PrivPermF_FillandSign		= Permit_FormFilling,	// 0x100,
														// Overrides other PDPerm bits. It allows the user to fill in
														// or sign existing form or signature fields.

	PrivPermF_Accessible		= Permit_TextGraphicsExtractions,	// 0x200,
														// Overrides pdPermCopy to enable the Accessibility API.
														// If a document is saved in Rev2 format (Acrobat 4.0 compatible),
														// only the pdPermCopy bit is checked to determine the Accessibility API state.

	PrivPermF_DocAssembly		= Permit_Assemble,		// 0x400,
														// Overrides various pdPermEdit bits and allows the following
														// operations: page insert/delete/rotate and create bookmark and thumbnail.

	PrivPermF_HighPrint			= Permit_HighQualityPrinting,	// 0x800,
														// This bit is a supplement to pdPermPrint. If it is clear
														// (disabled) only low quality printing (Print As Image) is allowed. On UNIX
														// platforms where Print As Image doesn't exist, printing is disabled.

	// Added perm bit (PV3) used for standard security handler
	// These bits only apply to standard security handler Revision 4
	// R4 is support by Acrobat 6.0 and up.
	PermF_Owner					= 0x8000,				// The user is permitted to perform all operations, regardless of
														// the permissions specified by the document. Unless this
														// permission is set, the document's permissions will be reset to
														// those in the document after a full save.

	PrivPermF_FormSubmit		= 0x10000,				// This should be set if the user can submit forms outside of the browser.
														// This bit is a supplement to pdPrivPermFillandSign.

	PrivPermF_FormSpawnTempl	= 0x20000,				// This should be set if the user can spawn template pages. This bit will allow
														// page template spawning even if pdPermEdit and pdPermEditNotes are clear.

	PermF_All					= 0xFFFFFFFF,			// All permissions.

	PermF_Settable				= (PermF_Print + PermF_Edit + PermF_Copy + PermF_EditNotes),
														// The OR of all operations that can be set by the user in the
														// security restrictions (pdPermPrint + pdPermEdit + pdPermCopy + pdPermEditNotes).

	PermF_User					= (PermF_All - PermF_Open - PermF_Secure),
}

Code: Select all

Permit_Printing: True
Permit_Modification: True //expecting FALSE
Permit_Copying_And_TextGraphicsExtractions: True //IS THIS "Content Copying" and "Page Extraction" ?
Permit_Add_And_Modify_Annotations: False
Permit_FormFilling: False
Permit_TextGraphicsExtractions: False
Permit_Assemble: False
Permit_HighQualityPrinting: False
Permit_Nothing: False
Permit_All: False

Code: Select all

Permit_Printing: 0 //Perm_ReqDenied
Permit_Modification: 0
Permit_Copying_And_TextGraphicsExtractions: 0
Permit_Add_And_Modify_Annotations: 0
Permit_FormFilling: 3
Permit_TextGraphicsExtractions: 3 // Perm_ReqUnknownOperation !!?
Permit_Assemble: 3
Permit_HighQualityPrinting: 3
Permit_Nothing: 3
Permit_All: 3

Code: Select all

//For printing
if ((Perm_ObjDoc, Perm_OperPrintHigh) == Perm_ReqGranted)
	//HighRes
else if ((Perm_ObjDoc, Perm_OperPrintLow) == Perm_ReqGranted)
	//LowRes
else
	//Not Allowed
//All of the next data by index in list
(1, Perm_ObjDoc, Perm_OperModify);
(2, Perm_ObjPage, Perm_OperCreate);
(3, Perm_ObjDoc, Perm_OperCopy);
(4, Perm_ObjDoc, Perm_OperAccessible);
(5, Perm_ObjPage, Perm_OperExport);
(6, Perm_ObjAnnot, Perm_OperCreate);
(7, Perm_ObjForm, Perm_OperFillIn);
(8, Perm_ObjSignature, Perm_OperFillIn);
(9, Perm_ObjForm, Perm_OperSpawnTemplate);