disable office (word,exccel) integration

Forum for the PDF-XChange Editor - Free and Licensed Versions

Moderators: TrackerSupp-Daniel, Tracker Support, Vasyl-Tracker Dev Team, Sean - Tracker, Paul - Tracker Supp, Chris - Tracker Supp, Tracker Supp-Stefan, Ivan - Tracker Software

Post Reply
Unilateral
User
Posts: 12
Joined: Sat Aug 18, 2018 11:05 am

disable office (word,exccel) integration

Post by Unilateral » Sat Aug 18, 2018 11:20 am

How do I disable PDF-XChange Editor integration into office programmes, that I could enable it when it is demanded?

In Word 2003 tools - templates and add-ins it shows PXCOfficeAddin5Toolbar.dot checkbox, which appears again after restart even if I uncheck and delete it
and it shows its panel.

there is a X:\Program Files\Tracker Software\PDF-XChange 5\Office2PDF5.exe file, I started but could have understood, how to use it?

User avatar
TrackerSupp-Daniel
Site Admin
Posts: 2738
Joined: Wed Jan 03, 2018 6:52 pm

Re: disable office (word,exccel) integration

Post by TrackerSupp-Daniel » Mon Aug 20, 2018 8:07 pm

Hello Unilateral,
If I am understanding correctly, What you are doing should work.

Simply following the steps in this article, but instead unchecking the tickbox, should remove the toolbaraddin from the office product you are currently using.
https://www.tracker-software.com/knowle ... ot-showing

I would also like some clarification, When you say:
Unilateral wrote:appears again after restart even if I uncheck and delete it
How are you "deleting" it?
Daniel McIntyre
Support Technician
Tracker Software Products (Canada) LTD

Sales: +1 (250) 324-1621
Fax: +1 (250) 324-1623

Willy Van Nuffel
User
Posts: 1400
Joined: Wed Jan 18, 2006 12:10 pm

Re: disable office (Word, Excel) integration

Post by Willy Van Nuffel » Mon Aug 20, 2018 8:43 pm

Hello,

Maybe the Word-template "PXCOfficeAddin5Toolbar.dot" is present in the Startup-folder of Word 2003.

In Word 2003, you can find the location of this Startup-folder via Tools > Options > File Locations > Startup.

When Word is closed (not active), you must go to the Startup-folder via Windows File Explorer, and rename the *.dot extension from the PXCOffice template to *.bak (or something else). In this way the template will not be loaded when you launch Word.
In case you need the PDF-XChange toolbar, rename back to *.dot.

An other way around is just to change the Startup location in Word itself. So, the template will not be loaded either.

Best regards.

User avatar
TrackerSupp-Daniel
Site Admin
Posts: 2738
Joined: Wed Jan 03, 2018 6:52 pm

Re: disable office (word,exccel) integration

Post by TrackerSupp-Daniel » Mon Aug 20, 2018 8:48 pm

Thanks Willy!
Daniel McIntyre
Support Technician
Tracker Software Products (Canada) LTD

Sales: +1 (250) 324-1621
Fax: +1 (250) 324-1623

Unilateral
User
Posts: 12
Joined: Sat Aug 18, 2018 11:05 am

Re: disable office (word,exccel) integration

Post by Unilateral » Sat Aug 17, 2019 4:53 pm

I could find there X:\Program Files\Tracker Software\PDF-XChange 5\PXCOfficeAddin5Toolbar.dot
I renamed it and replaced it, but it didn`t make the integration disappear. The pane still appears and its point in the menu presents.

Image Image

I see, this function only presents in standart version of a printer (pdf editor pro) and is absent in plus version.
What is the sense of this integration: it repeats the print command (ctrl+p), but takes resources from a computer.

How do I switch the option off?

User avatar
Will - Tracker Supp
Site Admin
Posts: 6820
Joined: Mon Oct 15, 2012 9:21 pm
Location: London, UK
Contact:

Re: disable office (word,exccel) integration

Post by Will - Tracker Supp » Mon Aug 19, 2019 10:44 am

Hi Unilateral,

Thanks for the post - Can you p[lease send a screen-shot of what you see in the Program Files folder?

Thanks,
If posting files to this forum, you must archive the files to a ZIP, RAR or 7z file or they will not be uploaded.
Thank you.

Best regards

Will Travaglini
Tracker Support (Europe)
Tracker Software Products Ltd.
http://www.tracker-software.com

Unilateral
User
Posts: 12
Joined: Sat Aug 18, 2018 11:05 am

Re: disable office (word,exccel) integration

Post by Unilateral » Sun Oct 27, 2019 6:32 pm

I managed to disable word 2003 integration in win7 by renaming the

Code: Select all

C:\Program Files\Tracker Software\PDF-XChange Standard\PXCOfficeAddin.x86.dll
to *.bak.

But it doesn``t satisfy me. I need the option, but it makes the normal.dot change every time, even if I change nothing, only open and close Word.

How do I disable an interference of an editor into office (2003) programmes?

After I had changed the name back to dll, the pane and integration didn`t restore. What do I make to enable an integration back?
Last edited by Unilateral on Tue Oct 29, 2019 6:50 pm, edited 1 time in total.

Unilateral
User
Posts: 12
Joined: Sat Aug 18, 2018 11:05 am

Re: disable office (word,exccel) integration

Post by Unilateral » Tue Oct 29, 2019 6:49 pm

When there was an Office integration, it converted links in DOC-files. It makes links flat (just format without links) via PDF XChange printer (standart) or via an utility "Office2PDF.exe".

User avatar
TrackerSupp-Daniel
Site Admin
Posts: 2738
Joined: Wed Jan 03, 2018 6:52 pm

Re: disable office (word,exccel) integration

Post by TrackerSupp-Daniel » Wed Oct 30, 2019 7:58 pm

Hello Unilateral,

I am a bit confused here, are you still trying to disable the addin, or are you wanting to enable it instead?

If you are trying to enable it, you will need to be running an older version of our software, as v7 and up are not supported in office 2003. Can you please elaborate on exactly what you want done here, and send the screenshot that Will requested, so that we can see what is currently installed and offer assistance based on that?

Kind regards,
Daniel McIntyre
Support Technician
Tracker Software Products (Canada) LTD

Sales: +1 (250) 324-1621
Fax: +1 (250) 324-1623

Unilateral
User
Posts: 12
Joined: Sat Aug 18, 2018 11:05 am

Re: disable office (word,exccel) integration

Post by Unilateral » Wed Oct 30, 2019 9:01 pm

Hello Daniel.
As I wrote, I tried to disable an integration first. I managed to do that by renaming "PXCOfficeAddin.x86.dll" to *.bak (as I wrote above).
But then I found, that now I can`t make pdfs with active hyperlinks - they are flat (blue, unferlined, but they are not links).
But when I renamed PXCOfficeAddin.x86.dll back to *.dll, it didn`t restore an integration.

Is there a way to restore an integration or, what would be better, make pdfs from word with active hyperlinks?

User avatar
TrackerSupp-Daniel
Site Admin
Posts: 2738
Joined: Wed Jan 03, 2018 6:52 pm

Re: disable office (word,exccel) integration

Post by TrackerSupp-Daniel » Thu Oct 31, 2019 12:31 am

Hello Unilateral,

Thank you for clarifying there. If you simply need links, the Standard printer is able to "analyze URL's in printed text":
image.png
However this setting only works for links written out in full, not hyperlinks over top of simply text, like "click here".

If you need all links to be converted, you will need to have the conversion plugin installed. I am unsure of which version the feature arrived in, however if you completely uninstall the software, then restart the PC, and reinstall the same version you had previously, you should be able to enable the plugin once more.

We generally do not advise meddling with the files on an old installation (or really any installation without direct instruction from our Dev team), as older installations in particular, we may not be able to replace the files for you if they are damaged or lost, and thus reinstalling is often the only way to resolve the issue.

Kind regards,
Daniel McIntyre
Support Technician
Tracker Software Products (Canada) LTD

Sales: +1 (250) 324-1621
Fax: +1 (250) 324-1623

Post Reply