PDF XChange Forum

Boise12345

Thanks guys. Sorry I was not more clear in earlier post. Have a good weekend!

Boise12345

I have tried this and the numbers do round, But I am trying to get the numbers to round up only and not round down. Example: If you have a dimension of 1.1 ft the rounding will display a dimension of 1 ft. I am trying to get my dimensions to round UP to the NEXT foot on any dimension over the whole ...

Boise12345

Patrick, I have used the calibration tool and understand that I can have the decimals as needed. I would like to be able to round a distance up to the nearest foot. So if I had a dimension that was 11.345', I would like the dimension to show as 12' with no decimals or fractions of inches. Is this ro...

Boise12345

Is there any way to get measurements rounded up or down?

Boise12345

Will,

Can you or anyone at Tracker refer me to a programmer that would like to contract out this work?

Boise12345

What is SDK used for? Do you have to be a programmer to use it effectively?

Boise12345

Will, With SDK would I be able to build a plug in that would allow me to make comments such as lines with separate names and also be able to build a list of the different lines? I do layouts for floor framing in new construction and I need to be able to draw lines and have them counted and separated...

Boise12345

I have programming needs that do not fall in to your future plans for the software. Do you know of any programmers that can help me write new features in to the program?

Boise12345

Are there any future plans to build a function to "explode" the content grouping?

Boise12345

Attached is a screen shot of the multi-pick of content when using edit content command. Any way to pick one of the items and not all? Any way to manipulate the settings when making the PDF so this will not occur? In many PDF's you can pick an entity that is "under" another content entity b...

Boise12345

I am having issues editing individual words in my PDF's. The problem is that multiple words or text entities are included in a large pick box. Some of the words do not need editing but are affected by virtue of the editing of other text included in the pick. Is there any way to break these large pic...

Boise12345

TY Stefan. I will try to reprint the file and optimize as well as delete un-needed sheets.

Boise12345

Some of the files I download seem to take way too long to generate when moving from one sheet to another in a multi-sheet PDF. Any ideas why or how to remedy this?

Thanks

Boise12345

Would the watermark function work for this purpose?

Boise12345

OMG I am so DENSE. I tried that a million different ways except the right one. Thank you! This will save me a ton of time over the course of a year!!!!!

Boise

Boise12345

Thank you Stefan and Sasha. I appreciate your quick responses. I have previously been using the ctrl c and ctrl v commands but was looking for a way to make the copies with a single command. I did try to use the duplication tool but I could not get the note that I was trying to test with to copy to ...

Boise12345

Thanks Will!

Boise12345

Hi All, I am looking to find out if a note/comment such as a revision date can be copied to multiple sheets in the same document with one command. I would like to have the note or comment retain it's editability or I would just use the watermark tool. Is this possible with the duplication tool? Than...

Boise12345

Stefan, Although I wish the responses were different..... Your swift response is very much appreciated!

Boise12345

Hi all,

I have attached a screenshot with questions I have about the distance tool - dimension line and the grouping of comments by those dimensions.

1. text connecting line removal

2. character defaults

3. "group by" question

Thanks,

Boise

Boise12345

Thanks Will

Boise12345

Will,

Thank you for the reply. Can it be programmed with the SDK to do different things, or this hard coded and not at all able to be manipulated?

I have other "tweeks" that I would like to ask about. Should I keep them coming on the forum?

Thanks,

Boise

Boise12345

Hi All,

I was wondering if there is any way to customize the output from the comment summary tool?

I would like to be able to produce this list without the date included for example.

Thanks,

Boise

Boise12345

Thank you Stefan!

Boise12345

Not finding the way to do this. Please help. Thanks.

Boise12345

Thank you Stefan!

Boise12345

THANKS ALL!!!!

Boise12345

This would be very useful in helpful with our continuity.

Thanks,

Boise

Boise12345

[quote="Boise12345"]Hi Radi,

In screenshot I was trying to pick the "H1" text and the symbol surrounding that text but got the large box picked instead.

Should have typed "H2"

Boise12345

Hi Radi, Thank you for your reply. In screenshot 1 I was trying to edit content and the border is highlighted and had to be deleted to do any other content editing. The editing I could do after I deleted the border was relligated to content outside of the building perimeter or else screenshot 2 woul...

Boise12345

I have been experiencing content pick issues. Example: I want to pick a text object or any "original content" and my pick ends up grabbing content I am not interested in editing. This is very annoying and counter productive. I must be doing something wrong? Please advise. Thanks, Boise

Boise12345

Thank you!

Boise12345

Hi Stefan, Thank you for responding! The comment styles palette is where I tried to rename a custom style for the perimeter tool. I pick the "custom" subject kind and then type in the desired name for the subject but none of the custom subjects I type in will show up in my comments column ...

Boise12345

BUMP.

Any possible way to get this looked at again. It would be very helpful. Thanks!

Boise12345

I am also having issues with the custom naming of the comments. I can't get any of the custom subjects that I type in to stick. I am running 312.1 on windows 8.1. Is it my system?

Boise12345

Will,

Thank you for your explanation. That makes sense to me as this is very specialized.

Best,

Bill

Boise12345

Thanks Will. How do I learn more about the use of this product? I am obviously a programming neophyte. I really just want to find out if any of your programs can be molded to do what I need them to. Many of the basic tools in need already exist in the program.

Thanks

Boise12345

Hi All, I am a PDF Exchange Editor user and would like to add/develop features to the program that do not currently exist to my knowledge. I run an design and estimating company that provides building plans, particularly engineered wood floor framing plans (see attached). I have duplicated the outpu...

Boise12345

I downloaded the SDK software to try and get a look at it. I don't seem to see an icon or a way to access or open the program. Can you give me some direction?

Thanks

Boise12345

Thank you Stefan. I will look at the SDK software and forum.

Boise12345

Hi All, Not sure if my subject line matches my request???? I do a large amount of very simple drafting for Boise Cascade Engineered Wood Products (BCEWP). BCEWP uses a program called Sapphire for drafting floor framing plans that is very complicated and extremely cumbersome. BCEWP has so much money ...

Boise12345

I can't figure out how to print from PDF Exchange in Windows 8.1. Can you please advise on how to set this up?

Thanks,

Boise12345

Thanks Will!

Boise12345

Thank you for the reply. I am looking for the capability to flip or mirror a copy of an already made comment or group of comments.

Boise12345

This function would enhance my efficiency and profitability by a large percentage. Thanks! Love this software!

Boise12345

I think I saw in one of the posts that the copy and paste function will be paste in cursor location in the future. That is a great feature, but would be nice to have the option of paste in previous place or cursor place. I have a ton of work that duplicates from sheet to sheet in the same location o...

Boise12345

I do most of my work in viewer and occasionally use editor for manipulating multiple objects. Today I copied large amounts of "line work" and typewriter text to a different document I was working on. The command worked well except some of my work had the "order" wrong. It automat...

Boise12345

I have confirmed it as build 214.2, but in the meanwhile my contractor uninstalled and reinstalled from the Tracker website and that solved the problem. My guess is that the original download file I sent him was corrupted in transfer. Sorry for the red herring..... The service on this forum is outst...

Boise12345

I am fairly certain it is 214.2 updated a week or two ago.

Boise12345

i will get the info. thanks

Search found 76 matches