PDF XChange Forum

Hello, MedBooster I am sorry I need to clarify, Is this settings reset in relation to the process of updating, as this topic states, or was it a random event tied only to a crash? In either case, the first thing we will want to see is, a "crash dump". If you can please configure crash logg...

Hello, Mathew

Thank you very much! Roman should be inspecting those files now if he hasn't already. If we need more information, we will be back

Kind regards,

Hello, Mathew

That certainly isn't the most promising... If the Dev team has any news to share about there being an alternative solution for this, I will come back, or perhaps they will post here directly. For now, I cannot offer any promises of changes to come.

Kind regards,

Hello, dasy2k1

I am glad to hear you at least have a working solution to use.

Have a nice day!

Hello, MedBooster

Thank you very much for this, we had talked about highlighting this excellent work, but hadn't decided on where and how to do so just yet. For now, I have marked this post as a sticky item so it appears at the top of the list in this subforum.

Kind regards,

Hello, PHK

If you are planning to manipulate the pages extensively like this, yes that would be ideal.

Kind regards,

Hello, MedBooster

Thank you, I have added your voice to the ticket as well.

Kind regards,

Hello, MedBooster

This has come up in discussion a few times, at the moment I do not believe it is a priority, but I will mention it again for you.

Kind regards,

Hello, Mathew Does your copy of the documentation offer any definition changes to that in PDF 1.7 or PDF 2.0? PDF 1.0 is quite old, and often unused these days, alongside that note bout this property being replaced in PDF 1.2, I would expect some other changes have come along since then. I don't hav...

Hello, PHK Horizontal means side to side, while vertical means up and down. From your screenshots, this seems to be working as intended. I am not sure what you mean when you say "greyed out" here however, between your two screenshots the only change seems to be the words horizontal/vertica...

Hello, MedBooster

Spreading the good news, the replace fonts tool, (which handles font color as well) is being updated in 386 to include this handling for comments as well

Kind regards,

Hello, MedBooster

Here is a little preview of the upcoming build 386 for you:

Kind regards,

Hello, PHK in Crop Pages the User has the option to remove content outside the box but I do not see the same in Resize. What happens to that content? Assuming you do not choose to scale the page content, the old content remains exactly where it was, beyond the page bounds. it is not removed, and you...

Hello, shade-cabin-hammock In a PDF, "links" are a separate object type from the text, they are not directly related, beyond at the moment of creation, this is why creating a link does not have the ability to change the text color or other such functions you might see in MS Word, or on a w...

Hello, Mathew At the moment, the only way to accomplish a colorization for overlay comparison purposes, would be to select all content in the "base" file, and manually change the stroke/fill colors as needed before overlaying the secondary file. Here is a sample where I have done the follo...

Hello, Mathew

Thank you for passing this along, I have informed the Dev team and they will be looking into it.

Kind regards,

Hello, XChangeGirl The deskew function is based on the orientation of the text on the page, so its possible that some portion of the page text happens to "appear" like there is a straight line when the file is rotated like that. Ideally I would like to get our scanner dev's involved with t...

Hello, Devtanfoglio The "error" you see in the middle there is the only one preventing the document from being converted to PDF/A, the others, while informational, are not critical issues, just confirmations or clarifications on what changes have happened to the file. That error however, i...

Hello, Mathew

It looks fantastic, Thank you very much for this!

Kind regards,

Hello, DazAusreo You can directly edit the scale at any time by clicking the dropdown when a measurement is selected: image.png You can also use the "calibration tool" to create a new measurement to use within any document, as detailed here: https://www.pdf-xchange.com/knowledgebase/454-Ho...

Hello, PHK No, those screenshots are from the Editor, as we have been discussing thus far, but text control is a fairly new addition to the software, and may not have been recorded to the manuals as of yet. I will let our writing team know about this change. In any case, the options presented there ...

Hello, XChangeGirl There is a known recurring issue which can occur with some scanners, where if you have the Deskew option enabled in both the scanners own drivers, and our software options while scanning it can cause the page to "overskew" essentially. Please try disabling deskew in eith...

Hello, mCHSNUg5Pz8cPap I think that may be the best way to accomplish this, yes. The split pages tool is intended to apply to a single split rule to the entire group of pages specified, it is not designed for page-page use in this way. You can use the "profiles" button in the lower left co...

Hello, PHK That is a, difficult question, but the easy answer is, "it depends on your options for each tool". Lets start with some background on how PDF itself works, since it tied into this. - Page content in a PDF is X/Y-coordinate based, every page of the document has a predefined 0,0 p...

Hello, dasy2k1 Watermarks will not work for this need, as they are a part of the "page content" and so are brought along with the page itself during any of the operations you mentioned. properly placed Digital signatures on the other hand, have this built in. If you place a digital signatu...

Hello, basje379 I am afraid not, for a few reasons... First, it appears that your redaction is already applied, this means it is a "shape" object on the page, no longer a comment, making intelligent selection difficult, if not impossible since other shape objects could be caught quite easi...

Hello, shade-cabin-hammock You would have two options here. - With the option you mentioned in your most recent post enabled, ensure that you are at fit width zoom before clicking any link/bookmark, or; - Use the edit zoom tool as before, but ensure that its zoom level is "fit width" (not ...

Hello, PHK All I did here was the same 2 step process I mentioned before. I will break it down with some screenshots to help (Since the file is large, and the OCR took a good 10 minutes the first time over, I am recording these with a blank document. The UI will of course remain the same): First, op...

Hello, PHK

How does this version of the file match your needs?

raster-then-searchable-OCR.pdf: (9.81 MiB) Downloaded 6 times

Is there anything missing, or extraneous you see here?

Kind regards,

Hello, MedBooster This seems to be working as you are requesting already, it is worth noting however that the fill color and "line art" checkbox are directly related to these objects: image.png It is also possible to choose "none" as the fill color for such objects: image(1).png ...

Hello, mykel.pamperin@fnf.com My apologies for the delay, We were not able to reproduce the issue with these files, and nothing else in our software should be able to cause such issues, but you have already verified that there are no background processes, and that all of your windows and device driv...

Hello, MedBooster

Well, at the very least, I can assure you that this ticket has not been rejected, but I still provide any timeline for its progress.

Kind regards,

Hello, MedBooster I am not sure about the logistics of making that work for the text inside of comments, but I believe it should be possible. I have mentioned it in another thread recently, but we do have an open ticket on that particular topic. RT#4577: FR: Edit text format of multiple comments As ...

Hello, MedBooster Yes, batch editing of text characteristics inside of selected comments is an ongoing item. We do have a ticket for it, as Stefan mentioned, and while it is not currently a high priority, I will ask the team to renew focus on this area. RT#4577: FR: Edit text format of multiple comm...

Hello, Davide78 If you pressthe Escape key 2-4 times (depending on the tool and which content was selected) the Editor should revert back to the "default tool" typically the hand as requested automatically. You can also toggle "keep selected" mode "off" for any tools wh...

Hello, Your way makes subtle changes to fonts and spacing in the visible image that are unaccetable to me. From your screenshot, you seem to still be using the "editable images" option, however you would want to use the "searchable image" option in this process. Searchable image ...

Hello, PHK I suppose it would work, but you have a few unnecessary extra steps. Your process could be as simple as 1. rasterize pages (with the option to flatten all text content enabled) 2. perform "searchable image" ocr. There is no need for using the 3rd option in the OCR dialog, nor se...

Hello, kimbjo I do agree adding a move to recycle bin option would be highly beneficial, but I am not certain if it is possible (or at least, reliable). The reason you could not navigate to the recycle bin with simply the name is because the recycle bin path is a hidden system file, and Windows uses...

Hello, PHK Unfortunately, not for base content... Perhaps we should consider adding some sorting options to the Content pane, similar to what the comments pane offers. For now though, I suppose another option would be to use "rasterize pages" on the convert tab. That would have the side ef...

Hello, N-N_milanesa_01 I do not know that it is possible via JS to modify these items reliably, but you can find the bookmark properties which are available to JS here: https://opensource.adobe.com/dc-acrobat-sdk-docs/library/jsapiref/JS_API_AcroJS.html#bookmark-properties From the looks of it, whil...

Hello, David.P I meant this one: In any case, that particular delay, when copying certain individual link object types, has had confirmation from the Dev team of a fix for the upcoming release. It should be available in the next few weeks, so please do keep an eye out for that. Hopefully it helps to...

Hello, shade-cabin-hammock If it is truely just "stubble" as you say, the OCR should not capture much, if any of it, but some items, for example if you have the lower half of the letter d, could be recognized as the letters a, o or u, perhaps... There is no way to prevent this other than m...

Search found 8579 matches