PDF XChange Forum

dwg11

Hi, it's build 366.0 version 9.5, the date is Dec 2022, it looks like it probably can't be resolved then.
Thanks anyway.

dwg11

Thanks for responding.
I can't figure out what build it is but suggest it's recent as the software I'm currently using is from work.

dwg11

Hi, I have "Restore Last session when application starts" on so that the working tabs aren't lost. This works as expected, except that I often use the context menu (right click menu), to combine files with "Combine in PDF-Exchange Editor" before the application is open, and then ...

dwg11

Thanks Stefan, this worked.

dwg11

Hi, if I have a document with hundreds of bookmarks, is it possible to automatically scroll to the bookmark related to the current page in view. For below example, I am viewing a page related to Section 7, and want the Section 7 to be highlighted in yellow and in view (as there a hundreds of bookmar...

dwg11

Great, really helpful. Thanks.

dwg11

Hi, is there a way to turn off the wordwrap, an issue with long file names? I find that it takes up too much space. Also makes it harder to read, it would be easier to differentiate between bookmarks if there was no wordwrap, even though you could not see all the text, trust me on this one. image(1)...

dwg11

Hi, again wanted to see if this has been implemented yet.

I had been using the earlier version (PDF-XChange Viewer), with the light blue colour icon, and found it to be better in this aspect .

dwg11

OK thanks for advising.

dwg11

OK thanks, that's a shame.

dwg11

Hi
How do you make the tab selector show on the Right Hand Side?
Thanks.

: image.png (6.44 KiB) Viewed 260 times

dwg11

Hi, just wanted to know the status of this?

dwg11

That would be useful.
When will this occur?

dwg11

OK thanks for clarifying. Is there any way to turn this Off? Ideally, I was actually looking for a File Manager, with all open tabs like in a browser for example. The PDF-XChange Viewer is actually not bad. Is this possible in the Editor? This is for thumbnails for each tab (or file), not for pages....

dwg11

Why is the tab order not updated in the Drop-Down after shuffling tabs?

: Untitled.png (22.59 KiB) Viewed 776 times

dwg11

Hi, yes all the items are correct as mentioned.

dwg11

Yes, this is on, ie, Subscribe topic.

dwg11

No, not in junk/spam folder.

dwg11

Hi, yes I do have the correct settings.
Thanks anyway.

dwg11

Thanks for the comments.
It looks like it's difficult to convert to lossless formats.

By the way, I typically have issues with receiving notifications. I've checked all the settings.

dwg11

Thanks for the comments. The images are raster for information. And the conversion was not as expected ... a mixture of text and graphics. I did try Inkscape but had no luck. I tried to convert to SVG, EMF and WMF. They converted into a solid black image. Do you have specific instructions. There are...

dwg11

Thanks for advising.
I can't find the "Select Content" tool on PDF-XChange Editor Plus.

dwg11

Thanks for advising.
Is there a way to export to SVG or XPS format? Or EMF or WMF?

dwg11

I wanted to convert PDF pages to images. The images will be pasted into Excel. The image will be resized several times, scaled up or down. The aim is to: keep original image quality when resizing. With the current options for "Image Type", I've tried all and tested. When scaling down to 10...

dwg11

Thanks for clarifying.

PS. I did not get an email notification.

dwg11

I am printing a document with a custom font (non Microsoft standard) using "PDF-XChange Lite". What I want to happen is for the end user to view the font in their computer, but no more than that, as the font is protected copyright. I've heard the term "subset" used to embed fonts...

dwg11

Thanks, I did miss that part with the DPI. Setting at 300dpi did work for me as well. I did purchase the PDF XChange Editor Plus and that's what I've been using. The speed is probably the same, maybe quicker on the Editor but you have to stay on it though (many documents). Ideally the Tools software...

dwg11

Thanks for responding. With respect to converting using PDF-Tools, how do you set the DPI though, there is no setting. Assuming it's the setting on PDF XChange, I did change this to 300dpi, but still does not process. Stuck on 32% for ages. I'm assuming you're with Tracker, is this not the case? Can...

dwg11

Could someone please assist with this.

dwg11

OK thanks.

dwg11

Is it possible to add menu items to the right clock menu?

dwg11

I am now having issues just processing 2 drawings, one at 4MB and one at 200kB. After waiting 5-10 minutes, it's still at less than 50% completion.
Why does this occur?

Even with checking the box "Multi-Threaded Processing Mode".

dwg11

All right thank you.

dwg11

Thanks for pointing that out. Can you please advise for the following: - There is no setting for DPI in the Image Saving Options dialogue. This is quite important. Or does it take the default setting in PDF-XChange Editor? - Why is there no choice for TIFF for single page documents? - I trialled on ...

dwg11

Could you help me get started.
Where is the command line written?
Can it account for the above settings?

dwg11

Thanks, I did try this. Using the Export PDF to Images tool. Without any coding.
However there are no settings apart from the DPI.
I need to adjust all of the ones below.
Can this be resolved with coding?

dwg11

Is it possible to batch convert PDF files into image files, using coding such as a script?
It's via Export to Image, choosing the image file, all the Options, saving to folder, etc.

dwg11

Hi
I did install the 351 build, but still have the same issue.
Is the PDF XChange Lite updated within PDF XChange Editor?

dwg11

OK thanks I just sent it.

dwg11

Hi, it's and Excel file and not a Word file.
What's the email address to send the file?

I should also mention it happens when I print with PDF-Change Lite. If I print with PDFill, this particular issue goes away. However there are other issues I have with PDFill and want to retain PDF-Change Lite.

dwg11

Hi, I'm using PDF-XChange Lite to print from Excel. A document may be about 50 pages long. I have Picture pasted in Excel (Enhanced Metafile type), and what is happening is that the image POSITION in the PDF printout is different to Excel. As the page number increases, the location of the Picture is...

dwg11

Yes, you're right, the Add-on tools was the second-last tab, I missed it.
That's good, at least something comes up.
I'll look at the required script next, please let me know what is available for the Copy and Paste actions. Or a link if you've seen something before.

dwg11

OK no worries. A funny thing happened when I switched to Classic view ... the button came up and it worked. The javascript code I had in the previous mentioned script is shown below. Interestingly it doesn't show in the Ribbon view. function zoom175() { this.zoom = 175; } app.addToolButton({ cName: ...

dwg11

Thanks for responding. I've looked at the reference documentation but it's a bit too advanced for me. Can you get me started as to how to add the button at least. So far I've created a folder called "JavaScripts" in directory "C:\Users\USER\AppData\Roaming\Tracker Software\PDFXEditor\...

dwg11

OK thanks I have just updated and will advise if I still have issues.

dwg11

OK thanks for responding.

dwg11

Oh great, that would help.

dwg11

OK thanks for confirming. As an improvement, I would suggest: - Selection box starting from Top, heading Down & Right: All of the object needs to be covered to be selected. - Selection box starting from Bottom, heading Up & Left: Part of the object needs to be covered to be selected. Possibl...

dwg11

I don't think this is possible, but will ask anyway.
Can tabs be grouped together, so that they are differentiated somehow as a group.
Similar to Internet Explorer in the past, see attached.

dwg11

Just bumping up.

Search found 64 matches